| Weight-increasing, darken, brighter and reinforcing agents | ||
|---|---|---|
| Weight increasing agent WG-1 | Yellowish liquid, nonionic | By absorbing water molecules in the air to form crystal hydrate, the purpose of fabric weight gain is achieved, mildew and plaque are not easy to appear, and it is suitable for weight gain finishing of various fabrics. |
| Deepener DX-3/5 | Opal white liquid, nonionic | Modified silicone polymer system, through the formation of irregular "concave and convex" film on the surface, to improve the refractive index, reduce the reflectivity, to achieve the purpose of deepening. |
| Brightener LT-810/1 | Opal white liquid, nonionic | Low molecular weight silicone wax system, good smoothness and stability, give fabric or leather surface moisture, oily luster, suitable for dipping, padding and wetting process. |
| Yarn crack preventive HS-GA | Blue transparent liquid, nonionic | By improving the adhesion between fibers and warp and weft yarns, the effects of yarn crack prevention, slip resistance and strength improvement are achieved, and the fabric surface is endowed with a rough linen imitation style. |
| Yarn Reinforcing Agent GA-1 | Blue transparent liquid, nonionic | By improving the adhesion between fibers and warp and weft yarns, the effects of crack prevention, slip resistance and strength improvement are achieved, and the influence on hand feeling is small. |
| Intensifier GA-9 | Yellowish transparent liquid, nonionic | Through the formation of high score network elastic film on the fabric surface, greatly improve the tear strength and reverse elasticity of the fabric, at the same time, color change is small, waterproof with the bath. |
| Windproof finishing agent | ||
| Windproof HS-5095 | Opal white liquid, nonionic | The compound based on modified wax system can effectively fill the gap between fabrics, improve the wear resistance of fabrics, reduce the air permeability of fabrics, and be used for windproof finishing. |
| Windproof HS-5096 | Cream yellow liquid, nonionic | The compound based on modified wax system can effectively fill the gap between fabrics, improve the wear resistance of fabrics, reduce the permeability of fabrics, and is mainly used for windproof and soft finishing. |
| Anti-yellowing finishing agent | ||
| Anti-yellowing agent DY-1 | Yellowish viscous liquid, anionic/nonionic | It has a good inhibitory effect on yellowing (storage yellowing) caused by BHT(di-tert-butyl-p-cresol), etc. It can be used in the same bath for whitening, or dipped or dipped. |
| Anti-yellowing agent DY-2 | Brownish yellow liquid, nonionic | It has a good inhibitory effect on yellowing caused by BHT (storage yellowing) and oxidation yellowing and color change caused by contact with air. It is recommended to dip and use, and it can be waterproof in the same bath. |
| Flame retardant finishing agent | ||
| Flame retardant KET-D | Yellowish liquid, nonionic | Good durable flame retardant finish for polyester and its blends, especially for polyester, polyester-cotton blends and PU coated fabrics. |
| Flame retardant powder HS-KETconc | White solid, nonionic | Organic polyphosphate compound, suitable for all kinds of fibers, halogen free, give a variety of fabrics good flame retardant effect, easy to dilute, easy to use. |
| Ultraviolet absorbent | ||
| UV absorbent UV-120 | milky liquid, nonionic | Nanometer compounds are mainly used, which can be evenly adsorbed on the surface of fabrics, effectively block and reflect ultraviolet rays and infrared rays, and improve the sunscreen index and light fastness of fabrics. |
| UV absorbent UV-123/126 | Yellowish liquid, nonionic | It is a compound with benzene ring structure system, which has good absorption effect on UVA and UVB. It is suitable for anti-UV finishing of various fabrics. Polyester fabrics are recommended to be dyed in the same bath. |
| UV absorbent UV-125 | Light yellow solid, anionic | Anion-containing sulfonic acid structure components, with the same characteristics as anionic dyes, more suitable for nylon, wool and their blended fabrics UV and light fastness enhancement. |
| Antibacterial and mildewproof agent | ||
| Antibacterial Finishing Agent HS-ACC | Light yellow transparent liquid, cationic | Polyguanidine salt cationic derivatives, broad-spectrum sterilization, antibacterial and anti-mite effect, good effect, high cost performance, easy to use, used for antibacterial finishing of various fabrics. |
| Antibacterial Finishing Agent ACC-3 | Blue light emulsion, nonionic | It is a kind of nanometer oxide derivatives, with good antibacterial, deodorizing and anti-ultraviolet properties, excellent washing resistance, dyeing or waterproof bath. |
| Mosquito-repellent ACC-5 | Yellowish transparency, nonionic | Modified pyrethroid derivatives, mosquito and mosquito repellent effect is obvious, effectively prevent mosquito bites, used for various fabrics mosquito and insect finishing. |
| Silver ion antibacterial agent ACC-6 | Light yellow liquid, weak anion | Nano-silver ion compound derivatives have good lasting antibacterial and deodorizing performance, low sensitivity to human body, and are widely used in antibacterial and deodorizing finishing of clothing fabrics. |
| Anti-pilling agent | ||
| Anti-pilling agent HS-2000 | milky clear liquid, nonionic | Through penetration and adhesion of fibers, effectively improve the yarn or fabric easy loose, easy pilling defects, for loose fibers caused by poor pilling effect of fabric finishing. |
| Anti-pilling agent HS-3000 | Opal white liquid, nonionic | By additive principle, the fabric surface is coated with a flexible protective film to reduce the directional friction effect of fibers, so that the slippage of fibers is weakened and the purpose of anti-pilling is achieved. |
| Anti-pilling agent HS-6000 | milky white liquid, anionic | By the additive principle, the fabric surface is coated with a layer of wear-resistant protective film, which reduces the directional friction effect of fibers and weakens the slippage of fibers to achieve the purpose of anti-pilling. |
Tel: +86-573-82798678 / 82798886
Fax: +86-573-82798677
E-mail: [email protected]
Address: China Energy Conservation Industrial Park, No. 1509 Jiachuang Road, Xiuzhou District, Jiaxing City, China
Mobile version